PESSL INSTRUMENTS PIPE PRESSURE
This sensor enables continuous monitoring of the pressure in irrigation pipes (main pipe or sector pipes) and is available for ranges from 2 to 10 Bar, so it can be used in all types of irrigation systems (drip irrigation, sprinkler, hydroponics …). It is easy to install under supervision of your irrigation system installer. The main body and the diaphragm of the ceramic thick-film sensor are made of a corrosion-resistant ceramic.
Applications: Irrigation monitoring and supervision, identification of pressure loss in the installation.
| SENSOR | PESSL INSTRUMENTS PIPE PRESSURE |
| Part No. | WPS |
TECHNICAL SPECIFICATIONS
| Range | 0 to 10 m of water column (other on request) |
| Resolution | 10 mbar |
| Accuracy | 0.3 % |
| Operating temperature range | 0 °C to 50 °C |
| Storage temperature range | -20 °C to 80 °C |
| Weight | 300 g (including cable) |
| Housing | pom |
| Diaphragm | Ceramic |
| Cable sheath | Shielded PVC |
| Output signal | Serial (RS485) |
| Support | PI-BUS only at the end of the chain |
| Dimensions gauge shaft | 90 x 20 mm (height x diameter) |
PESSL INSTRUMENTS GmbH
Werksweg 107, A-8160 Weiz, Austria
Tel: +43 (0) 3172 5521, Fax: +43 (0) 3172 5521 23
E-mail: sales@metos.at, Webpage: www.metos.at
Values may be changed without notice. All rights reserved. © 1984-2020 Copyright PESSL INSTRUMENTS GmbH
