Basic sensor set for remote areas
μMETOS SOIL LoRa is a LPWAN weather station that operates on LoRaWAN® and can be connected to any existing LoRaWAN® network, if present at your location.
μMETOS SOIL LoRa
μMETOS SOIL LoRa is designed to monitor basic climate parameters (rain and temperature), soil characteristics (soil moisture, soil temperature and electrical conductivity), as well as water pressure.
μMETOS SOIL LoRa can handle various sensors. Data is permanently measured in 5-minute intervals and sent every 15 minutes to the server. All the data is synchronized with FieldClimate platform.
By the use of crop evapotranspiration better plan the irrigation, save water, money and time.
Helps prevent animal health problems that occur in houses with nonstandard climatic conditions.
Plant disease model calculation to improve plant protection and prevent crop losses.
Work planning on farms – it saves time and makes farming even more efficient.
μMETOS SOIL BASE
A basic μMETOS station with no physical sensors.
μMETOS SOIL RAIN
Rain gauge and soil temperature.
|Housing||UV resistant polycarbonate plastic (Protection class IP65)|
|Dimensions||30 cm L x 16 cm W x 19 cm H|
|Connectivity||LoRaWAN: EU863-870, US902-928, AU915-928, AS923|
|Measuring interval||LoRaWAN: 5 minutes|
|Logging interval||LoRaWAN: 15 minutes||Transmission interval||LoRaWAN: 15 minutes|
|Battery||6V charging battery with solar panel|
|Solar panel||Dimensions: 13.5 x 13.5 cm, 2 Watt solar panel|
Measurement, logging and transmission intervals can be set differently to fit the client’s needs.
Measurement interval: occurrence, when the station measures the attached sensors
Logging interval: occurrence, when the station calculates the minimum, maximum and average values of all measurements which happened in this logging interval
Transmission interval: occurrence, when the station transmits the stored data from the logging interval to the FieldClimate.
Logging and transmission intervals for LoRaWAN communication-based products are the same.
|Pessl Instruments PI 54-A and PI 54-D Sensor|
|METER Group sensors (EC5, 10HS, MPS6, 5TE, 5TM, GS1, GS3)|
|Sentek D&D Profile Sensor Probe (10 / 30 / 60 / 90 / 120 cm)**|
|Sentek D&D Triscan Profile Sensor Probe (10 / 30 / 60 / 90 / 120 cm)**|
|Aquacheck Sub-Surface Probe (60 / 80 / 120 cm)|
|Pessl Instruments EC Sensor Module|
|Pessl Instruments pH Sensor Module|
|Pressure Switch 1 Bar|
|Flow Meter Internal Interface Directly Connectable to Rain Sensor Input|
|*The number of connected sensors to a single station is limited. For specific sensor set consult with your dealer|
|**Sentek D&D and Aquacheck, longer than 60 cm, can only be connected to NBIoT stations.|
Additional technical notes for the setup of an μMETOS SOIL LoRa station are available in the Manuals section of our website.
When ordering LoRaWAN products, fill out this order document: LPWAN (LoRaWAN) order details
Send the filled document to email@example.com.
In case when you are not sure if selected product fits to your requirements, please consult key account managers and distributors designated for your Country.
GOT A QUESTION? ASK THE EXPERT!*
Product manager, iMETOS LPWAN solutions & Trackers