METER GROUP ATMOS 22 ULTRASONIC WIND SENSOR
Previously known as Decagon Ultrasonic Wind Sensor
ATMOS 22 is a research-grade two-dimensional sonic wind sensor, built specifically for agricultural, forestry, and environmental research applications. A lower wind speed threshold makes it especially well suited for measuring wind within plant canopies, where wind speeds are often below the threshold of a cup wind sensor.
| SENSOR | METER GROUP ATMOS 22 ULTRASONIC WIND SENSOR |
| Part No. | DS-2 |
Technical specifications
| Horizontal wind speed | Range: 0-30 m/s Resolution: 0.01 m/s Accuracy: the greater of 0.3 m/s or 3% of measurement |
| Wind gust | Range: 0-30 m/s Resolution: 0.01 m/s Accuracy: the greater of 0.3 m/s or 3% of measurement |
| Wind direction | Range: 0°-359° Resolution: 1° Accuracy: ±5° |
| Tilt | Range: 0°-180° Resolution: 0.1° Accuracy: ±1° |
| Dimensions | 10 cm diameter × 16 cm height |
| Cable length | 5 m (custom cable lengths are available for an additional cost) |
| Supply voltage (VCC) to GND | 3.6 to 15.0 VDC |
| Current drain (while asleep) | 0.050 to 0.150 mA (typical 0.125 mA) |
| Current drain (during measurement) | 0.050 to 0.500 mA (typical 0.125 mA) |
| Operating temperature range | -40 to 50 °C |
PESSL INSTRUMENTS GmbH
Werksweg 107, A-8160 Weiz, Austria
Tel: +43 (0) 3172 5521, Fax: +43 (0) 3172 5521 23
E-mail: sales@metos.at, Webpage: www.metos.at
Values may be changed without notice. All rights reserved. © 1984-2018 Copyright PESSL INSTRUMENTS GmbH
