iMETOS RADIONODE INTERFACE (available on special demand only)

RadioNode

iMETOS RadioNode is a small, wireless, battery-powered datalogger for in-field measurement of soil moisture, temperatures, rain, flow rate, leaf wetness, relative humidity and other parameters. iMETOS RadioNode sends all sensor readings in real-time through an interactive star topology network back to our base station. From the base station, the data is uploaded to the web via a cellular network (GPRS, UMTS, WiFi). All data is available through FieldClimate platform. To connect iMETOS RadioNode to the iMETOS 3.3, RF Access Point is needed.

There are two variations:

iMETOS RadioNode Watermark/METER

RadioNode Watermark with inputs for:
1. Rain gauge 0.2 mm (0.01 inch) / Water meter
2. Temperature sensor (WMTEMP)
3.-6. Watermark sensor
7.-10. PI54-D

Power Supply: One 3.6V Li-Ion primary cell with 19.000mAh (7 years of operation)

SD51 iMETOS RadioNode Drill & Drop

Drill&Drop_Interface

SD51 iMETOS RadioNode Drill & Drop with inputs for:
1. Rain gauge 0.2 mm (0.01 inch)
2. Sentek Drill & Drop probe
3.-4. Watermark sensor
5.-6. PI54-D
7. Solar panel
8. 6V, 4.5Ah battery connector
9. External antenna

Power Supply: Solar panel and 6V Pb 4.5Ah battery

FEATURE VALUE
Housing
UV resistant polycarbonate plastic (Protection class IP67)
Dimensions without sensors
30 cm L x 16 cm W x 19 cm H
Weight without sensors
1.6 kg
Model/Type
Texas Instruments RF CC1120 module with integrated ultra low power sub-GHz; transceiver module; integrated crystal, internal voltage regulator, build in antenna global; using free ISM bands, ISM Band 915 MHz: USA, Canada, Australia, Israel etc.; ISM Band 868 MHz: Europe; ISM Band 433 MHz: Asia
Expected range
300 to 400 meter (1200 to 1400 ft.) at +10 dBm, broad line of sight, when mounted on level ground at least 3 m (10 ft.) high and above crops, grass, bushes or foliage

CHAIN NODE INTERFACE FOR 3 PESSL INSTRUMENTS SENSORS

ChainNode for 3 PI sensors

Order number: 600069 / 900052 / 900173

This Interface allows the connection of up to 3 PI54-D sensors to an METOS® weather station.

The Interface can be an External box for iMETOS 3.3 (ECH870EXT).

You can connect:

  • Vacuum Tensiometer
  • Water Level Sensor
  • Pipe Water Pressure Sensor
  • PI54-D

CHAIN NODE INTERFACE FOR 2 PESSL INSTRUMENTS SENSORS & 2 WATERMARK SENSORS & 1 SOIL TEMPERATURE SENSOR

ChainNode_2PI_2WM-min

Order number: 600068 / 900051 / 900174

This Interface allows the connection of up to 5 soil sensors to a METOS® weather station. It is possible to connect 2 PI54-D Sensors, 2 Watermark Sensors and 1 Soil Temperature Sensor.

The Interface can be an External box for iMETOS 3.3 (ECH871EXT).

You can connect:

  • 2 pieces of Watermark sensor
  • 1 piece of Soil Temperature (WMTEMP)
  • The following PI sensors:
    • Vacuum Tensiometer
    • Water Level Sensor
    • Pipe Water Pressure Sensor
    • PI54-D

CHAIN NODE INTERFACE FOR 1 PESSL INSTRUMENTS SENSOR & 4 WATERMARK SENSORS & 1 SOIL TEMPERATURE SENSOR

CHAIN NODE INTERFACE FOR 1 PESSL INSTRUMENTS SENSOR & 4 WATERMARK SENSORS & 1 SOIL TEMPERATURE SENSOR-min

Order number: 600167 / 900057 / 900175

This Interface allows the connection of up to 6 soil sensors to an METOS® weather station. It is possible to connect 1 PI54-D sensor, 4 Watermark sensors and 1 soil temperature sensor.

The Interface can be an External box for iMETOS 3.3 (ECH874EXT).

You can connect:

  • Four pieces of Watermark sensor
  • One piece of Single Soil Temperature
  • One piece of the following PI sensors:
    • Vacuum Tensiometer
    • Water Level Sensor
    • Pipe Water Pressure Sensor
    • PI54-D

SDI12 CHAIN NODE INTERFACE WITH 2 iMETOS AC OR SENTEK CONNECTORS

extension_SDI12_v2_2022

Order number: 600150 / 900105

This Interface allows the connection of up to 2 iMETOS AC or 2 Drill & Drop probes.

The Interface can be an External box for iMETOS 3.3 (SDI12_Chain).

You can connect:

  • two pieces of:
    • iMETOS AC different types
    • Sentek Drill & Drop different types

Have a question?
Contact us. We are happy to help.

Contact us if you have any questions regarding our hardware!

    By submitting your email you agree that Pessl Instruments may send you promotional e-mail messages with updates, news, latest blog posts, event invitations and other similar messages. You understand and agree that Pessl Instruments may use your information in accordance with its Privacy Policy. You can opt-out anytime.