This is what you can do:

• Plan the work week based on a localised weather forecast for your operations site

• Plan your work day based on the actual rain and temperature data and the daily weather forecast for your field

• Plan your spray program based on disease models and prediction and check the quality of spray work online

• Plan your irrigation based on ET-crop and predicted plant water use

• Bring data directly into your management software and Operations Center via automatic interface

IMETOS LORAIN IS DESIGNED TO BE EASILY CONNECTED TO AN EXISTING LORA NETWORK. FOR REMOTE SITUATIONS WITHOUT THE AVAILABILITY OF A COMMERCIALLY OPERATED LORA NETWORK PESSL INSTRUMENTS PARTNERS WILL SUPPORT YOU WITH A FARM BASED LORA NETWORK WHICH ENABLES YOU TO INSTALL ALL AVAILABLE LORA SENSORS – FROM PESSL INSTRUMENTS OR OTHER VENDORS.

 

BY USING THE PROPRIETARY INTELLIGENT SENSOR HANDLING, THE iMETOS LoRAIN PROVIDES VALUES OF:

• Leaf wetness for disease forecast,
• VPD and Delta T for defining best weather for spraying (spray window),
• Dew point for frost prediction.

 

 

More iMETOS LoRAIN Applications

 
WORK PLANNING TOOLS BASED ON WEATHER FORECAST
The spray window helps identify suitable periods for the application of crop protection measures by showing suitable (green), less suitable (yellow) and unsuitable (red) periods for application. The conditions are calculated from wind, precipitation, air temperature, relative humidity and delta T.

CERCOSPORA BETICOLA DISEASE MODEL
This simple risk model is used to evaluate, if C. beticola could be expected at all. If the incubation period could be fulfilled within the last 2 weeks, a value of 1 of incubation is shown, if not, the value is 0. Besides this model also a model for sporulation is shown. For sporulation, optimal conditions of 48 hours of high relative humidity with an average temperature of 30°C are used. For the interpretation of data: The risk is 0 if the incubation period has been longer than 2 weeks. If this is not the case, the model output will be 1. If there is a sporulation model result of higher than 10% calculated within the last week, the risk will be shown to be 2 and if the sporulation result is higher than 30% the risk output will be 3.

 

TECHNICAL SPECIFICATIONS

Connectivity range 8 km line of sight between the iMETOS LoRAIN device and LoRa Gateway
Intelligent power supply State of the art super capacitor charged with the solar panel
The very low power requirements of LoRaWAN communication enables a battery-free power concept for iMETOS LoRAIN. Avoid the hassle with forgetting to switch off the device or damaging the batteries due to deep discharge during storage. Bring it to the sun and it will start working. Bring it to the shade and after 6 days it will slowly stop for the time being in shade.
Sensors Rain Gauge: Sensitivity: 1 tip per 0.2 mm

Air Temperature:
Operating temperature range: -40 °C to +125 °C
Thermometer error -10 °C to +85 °C: +/- 0.3 °C

Relative humidity:
Precision 0 – 80 %: +/- 2 %
Precision 80 – 100 %: +/- 3 %

iMETOS® HANDBÜCHER

Zugriff auf detaillierte technische Dokumentationen und Antworten auf häufig gestellte technische Fragen.


ZU DEN HANDBÜCHERN